InfuSsion Mash Tun - 10 Gal (US) / 37.5L

Reviewing this product could earn you at least 5 points

SKU: mt10-001
Rating:
100% of 100
£325.00
Availability: In stock

Purchase this product and earn at least 325 points

The InfuSsion™ Mash Tun from Ss Brewing Technologies is targeted at brewers doing infusion mashing in insulated plastic coolers and are looking for a better performing piece of equipment made of 304 Stainless Steel that is purposefully built for brewing. In side by side testing, the 10 gallon InfuSsion Mash Tun showed 5F less of temperature decay over a 60 minute mash as compared to a similarly sized plastic cooler. The InfuSsion Mash Tuns also have a concave recess under the false bottom that has a center located drain that plumbs out to a ½” ball valve. By locating the drain port in the middle we are able to get better uniformity and efficiency through the grain bed versus traditional plastic cooler setups. Future upgrade options (that will be retro compatible with any / all InfuSsion Mash Tuns) will include a custom designed sparge arm / assembly as well as a heating module and controller that will enable stabilization of a constant mashing temperature of 145-160F. You can also use our MTSs temp controller to easily make kettle sours! - Dual wall (foam insulated) high grade 304 Ss - Better temp retention than plastic - Ultra high efficiency mashing! - Get clear wort / set grain bed very efficiently - Center drain and 5 degree sloped bottom - NO DEAD SPACE! Conical bottom with drain! - Foam insulated lid for heat retention - Etched volume markings (gals/liters) - Dimensions: 18"W x 23"H, 33 lbs weight
InfuSsion Mash Tun - 10 Gal (US) / 37.5L
InfuSsion Mash Tun - 10 Gal (US) / 37.5L InfuSsion Mash Tun - 10 Gal (US) / 37.5L InfuSsion Mash Tun - 10 Gal (US) / 37.5L InfuSsion Mash Tun - 10 Gal (US) / 37.5L
The InfuSsion™ Mash Tun from Ss Brewing Technologies is targeted at brewers doing infusion mashing in insulated plastic coolers and are looking for a better performing piece of equipment made of 304 Stainless Steel that is purposefully built for brewing. In side by side testing, the 10 gallon InfuSsion Mash Tun showed 5F less of temperature decay over a 60 minute mash as compared to a similarly sized plastic cooler. The InfuSsion Mash Tuns also have a concave recess under the false bottom that has a center located drain that plumbs out to a ½” ball valve. By locating the drain port in the middle we are able to get better uniformity and efficiency through the grain bed versus traditional plastic cooler setups. Future upgrade options (that will be retro compatible with any / all InfuSsion Mash Tuns) will include a custom designed sparge arm / assembly as well as a heating module and controller that will enable stabilization of a constant mashing temperature of 145-160F. You can also use our MTSs temp controller to easily make kettle sours! - Dual wall (foam insulated) high grade 304 Ss - Better temp retention than plastic - Ultra high efficiency mashing! - Get clear wort / set grain bed very efficiently - Center drain and 5 degree sloped bottom - NO DEAD SPACE! Conical bottom with drain! - Foam insulated lid for heat retention - Etched volume markings (gals/liters) - Dimensions: 18"W x 23"H, 33 lbs weight

Please enter your postcode at the checkout to ensure that we charge the correct amount towards postage and packing.

We aim to despatch all orders within 24 hours, by our dedicated team of packers, and sent by courier on a 24 hour service. All orders are packed with care using air bags and bubble wrap where appropriate. In the unfortunate event that your order is damaged during transit we will replace all damaged items without quibble, including glass items, just send us a photo of the damaged items within 3 days of recieving delivery.

Please note that we only process orders Monday - Friday and therefore bank holidays can cause slight delays in despatch so please be patient at these times. There can also be a slight delay during extremely busy periods especially in the run up to Christmas but most orders will be despatched within a few days.

A signature is required for delivery and the courier will not leave your parcel unless it has been signed for. If you are not in an advice card will be left and your parcel will be taken to your local post office or depot. An alternative, work, address can be entered at the checkout. Use this function for sending your parcel as a present. Please contact us if you wish to send your goods as a present and we will be happy to include a personal message in the contents. This will not delay your order.

We cannot accept orders to BFPO addresses.

Delivery Costs

UK Costs for orders under £65

Up to 500g sent Royal Mail 1st Class 501 - 1kg Sent Royal Mail First Class

1kg - 1.5kg Sent Royal Mail 1st Class

Over 1.5kg to 30kg Sent Parcel Force

Zone 1 - UK Mainland (all postcodes not mentioned in zone 2 and 3)

£2.99

£3.99

£4.99

£5.99 (24 hr) (Free non priority despatch option on orders over £65*)

£30 for Saturday delivery.



£11.99 (48 HR)

Zone 1 - Isle of Wight

£2.99

£3.99

£4.99

Zone 2 - Postcodes beginning with IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE

£2.99

£3.99

£4.99

£13.99 (48 HR)

Zone 3 - Postcodes beginning with BT, IM, TR21,22,23,24,25

£2.99 £3.99 £4.99 £16.50 (48HR)

UK Costs for orders over £65

Up to 500g sent Royal Mail 1st Class 501 - 1kg Sent Royal Mail First Class

1kg - 1.5kg Sent Royal Mail 1st Class

Over 1.5kg to 30kg Sent Parcel Force

Zone 1 - UK Mainland (all postcodes not mentioned in zone 2 and 3)

FREE

FREE

FREE

1st 30kg Free .

Additional 30kg £5.99 but free with each additional £65 spend

£30 for Saturday delivery.



1st 30kg £6.00 - £11.99/additional 30kg

Zone 1 - Isle of Wight

FREE

FREE

FREE

Zone 2 - Postcodes beginning with IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE

FREE

FREE

FREE

1st 30kg £8.00 - £13.99/additional 30kg

Zone 3 - Postcodes beginning with BT, IM, TR21,22,23,24,25

FREE FREE FREE 1st 30kg £10.00 - £16.50/additional 30kg

Europe

Order up to £65 Orders over £65
Country 0kg - 30kg Per Subsequent 30kg 0kg - 30kg Per Subsequent 30kg
Channel Islands As UK £10.00 £10.00 £4.00 £10.00
Ireland (Republic of) £14.00 £14.00 £8.00 £14.00
Belgium and Luxembourg £14.00 £14.00 £8.00 £14.00
Netherlands £14.00 £14.00 £8.00 £14.00
France £16.50 £16.50 £10.50 £16.50
Denmark £16.50 £16.50 £10.50 £16.50
Germany £14.50 £14.50 £8.50 £14.50
Italy £23.50 £23.50 £17.50 £23.50
Spain £27.50 £27.50 £21.50 £27.50
Portugal £27.50 £27.50 £21.50 £27.50
Greece £28.00 £28.00 £22 £28.00

Austria/Czech Republic/Finland/Hungary

Lithunia/Norway/Poland/San Morino/Sweden

Slovakia/Slovenia/Switzerland

Estonia

£31.50 £31.50 £25.50 £31.50
Latvia £31.50 £31.50 £25.50 £31.50
Turkey £31.50 £31.50 £25.50 £31.50
Croatia £31.50 £31.50 £25.50 £31.50
Malta £64.00 £31.50 £58.00 £31.50
Reviews

Write Your Own Review

You're reviewing:InfuSsion Mash Tun - 10 Gal (US) / 37.5L
How would you rate this product?
Customer Reviews
  1. 100%
    Top Kit!

    Review by on

    Absolutely love this! Amazing build quality, solid construction. Very easy to clean and so easy to brew with. Central tap and pitched bottom work perfectly for draining wort during sparging!
Page Background Image