SS Brewtech Pressurized Transfer Kit | Chronical BME New

More Views

SS Brewtech Pressurized Transfer Kit | Chronical BME

SKU:AK-CFPTBME-001

Be the first to review this product

£57.99

Availability: In stock

You could receive 5 Reward Points for writing a review and/or rating this product.

Details:

This kit is designed for owners of Chronical BME Fermenters and includes everything you need to introduce CO2 pressure into your fermenter without removing the lid cap and risking O2 contamination. The Chronical BME's 3" Lid cap includes a PRV that prevents pressure from building to unsafe levels.
Due to the popularity of both open and closed transfers with Chronical BME users, this kit does not include the output side to the keg, so please add a TC 1/2" barb, 3/8" barb or 1/4" MFL fitting and the appropriate tubing for the type of transfer you plan on doing.
Setup:
Begin by locating the 1/2" tubing and attach one side to the 3" TC lid cap's blow off barb that was included with the Chronical BME. Then attach the other side of the 1/2" tubing to the 1.5" TC to 1/2" Barb fitting, using hose clamps to secure both connections. Then attach the 1.5" TC to 1/2" Barb fitting to the included 1.5" TC to 1/4" MFL fitting with a TC clamp and gasket. Lastly, the 1/4" MFL connection can interface with common gas line flare fittings used on CO2 regulators.
This kit only includes accessories to introduce pressure into your fermenter. It dos not include accessories for beer output.

Kit Includes:
(1) 1.5" TC to 1/2" Barb
(1) 1.5" TC to 1/4" MFL
(1) TC Clamp
(1) TC Gasket
(1) 5 ft Length of 1/2" Silicone Tubing
(2) Hose Clamps
Purchasing this product will earn you at least 57 points

Details

This kit is designed for owners of Chronical BME Fermenters and includes everything you need to introduce CO2 pressure into your fermenter without removing the lid cap and risking O2 contamination. The Chronical BME's 3" Lid cap includes a PRV that prevents pressure from building to unsafe levels. Due to the popularity of both open and closed transfers with Chronical BME users, this kit does not include the output side to the keg, so please add a TC 1/2" barb, 3/8" barb or 1/4" MFL fitting and the appropriate tubing for the type of transfer you plan on doing. Setup: Begin by locating the 1/2" tubing and attach one side to the 3" TC lid cap's blow off barb that was included with the Chronical BME. Then attach the other side of the 1/2" tubing to the 1.5" TC to 1/2" Barb fitting, using hose clamps to secure both connections. Then attach the 1.5" TC to 1/2" Barb fitting to the included 1.5" TC to 1/4" MFL fitting with a TC clamp and gasket. Lastly, the 1/4" MFL connection can interface with common gas line flare fittings used on CO2 regulators. This kit only includes accessories to introduce pressure into your fermenter. It dos not include accessories for beer output. Kit Includes: (1) 1.5" TC to 1/2" Barb (1) 1.5" TC to 1/4" MFL (1) TC Clamp (1) TC Gasket (1) 5 ft Length of 1/2" Silicone Tubing (2) Hose Clamps

You may also be interested in the following product(s)

Need to know - Delivery

Bookmark and Share

Please enter your postcode at the checkout to ensure that we charge the correct amount towards postage and packing.

We aim to despatch all orders within 24 hours, by our dedicated team of packers, and sent by courier on a 24 hour service. All orders are packed with care using air bags and bubble wrap where appropriate. In the unfortunate event that your order is damaged during transit we will replace all damaged items without quibble, including glass items, just send us a photo of the damaged items within 3 days of recieving delivery.

Please note that we only process orders Monday - Friday and therefore bank holidays can cause slight delays in despatch so please be patient at these times. There can also be a slight delay during extremely busy periods especially in the run up to Christmas but most orders will be despatched within a few days.

 A signature is required for delivery and the courier will not leave your parcel unless it has been signed for. If you are not in an advice card will be left and your parcel will be taken to your local post office or depot.  An alternative, work, address can be entered at the checkout. Use this function for sending your parcel as a present.  Please contact us if you wish to send your goods as a present and we will be happy to include a personal message in the contents.  This will not delay your order.

We cannot accept orders to BFPO addresses.

Delivery Costs

UK Costs for orders under £65

 

  Up to 500g sent Royal Mail 1st Class 501 - 1kg Sent Royal Mail First Class

1kg - 1.5kg Sent Royal Mail 1st Class

Over 1.5kg to 30kg Sent Parcel Force

 

Zone 1 - UK Mainland (all postcodes not mentioned in zone 2 and 3)

 

 

£2.99

 

 

£3.99

 

 

£4.99

 

£5.99 (24 hr) (Free non priority despatch option on orders over £65*)

£30 for Saturday delivery.



£11.99 (48 HR)

 

Zone 1 - Isle of Wight

 

 

£2.99

 

 

£3.99

 

 

£4.99

 

Zone 2 - Postcodes beginning with IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE

 

£2.99

 

£3.99

 

£4.99

 

£13.99 (48 HR)

Zone 3 - Postcodes beginning with BT, IM, TR21,22,23,24,25

£2.99 £3.99 £4.99 £16.50 (48HR)

 UK Costs for orders over £65

 

  Up to 500g sent Royal Mail 1st Class 501 - 1kg Sent Royal Mail First Class

1kg - 1.5kg Sent Royal Mail 1st Class

Over 1.5kg to 30kg Sent Parcel Force

 

Zone 1 - UK Mainland (all postcodes not mentioned in zone 2 and 3)

 

 

FREE

 

 

FREE

 

 

FREE

 

1st 30kg Free .

Additional 30kg £5.99 but free with each additional £65 spend

 £30 for Saturday delivery.



1st 30kg £6.00 - £11.99/additional 30kg

 

Zone 1 - Isle of Wight

 

 

FREE

 

 

FREE

 

 

FREE

 

Zone 2 - Postcodes beginning with IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE

 

FREE

 

FREE

 

FREE

 

1st 30kg £8.00 - £13.99/additional 30kg

Zone 3 - Postcodes beginning with BT, IM, TR21,22,23,24,25

FREE FREE FREE 1st 30kg £10.00 - £16.50/additional 30kg



Europe
  Order up to £65 Orders over £65
Country Up to 1kg 1kg - 30kg  Per Subsequent 30kg Up to 1kg 1kg - 30kg Per Subsequent 30kg
Channel Islands As UK £10.00 £10.00 £1.5 £4.00 £10.00
Ireland (Republic of) £7.5 £14.00 £14.00 £1.5 £8.00 £14.00
Belgium and Luxembourg £7.5 £14.00  £14.00 £1.5 £8.00 £14.00
Netherlands £7.5 £14.00 £14.00 £1.5  £8.00 £14.00
France £7.5 £16.50 £16.50 £1.5 £10.50 £16.50
Denmark £7.5 £16.50 £16.50   £1.5 £10.50 £16.50
Germany £7.5 £14.50 £14.50 £1.5 £8.50 £14.50
Italy £7.5 £23.50 £23.50 £1.5 £17.50 £23.50
Spain £7.5 £27.50 £27.50 £1.5 £21.50 £27.50
Portugal £7.5 £27.50 £27.50 £1.5 £21.50 £27.50
Greece £7.5 £28.00 £28.00 £1.5 £22 £28.00

Austria/Czech Republic/Finland/Hungary

Lithunia/Norway/Poland/San Morino/Sweden

Slovakia/Slovenia/Switzerland

Estonia

£7.5 £31.50 £31.50 £1.5 £25.50 £31.50
Latvia £7.5 £31.50 £31.50 £1.5 £25.50 £31.50
Turkey £7.5 £31.50 £31.50 £1.5 £25.50 £31.50
Croatia £7.5 £31.50 £31.50 £1.5 £25.50 £31.50
Malta £7.5 £64.00 £31.50 £1.5 £58.00 £31.50

Reviews

Write Your Own Review

You're reviewing: SS Brewtech Pressurized Transfer Kit | Chronical BME

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating