Woodfordes Microbrewery Premium 40 Pint Starter Set

Extract brewing uses the same basic techniques as kits but you prepare the wort from ingredients rather then using kit concentrate. Water, malt extract and hops are boiled for approx 1 hour before cooling then adding yeast as above. This method requires a large pan (10 litre minimum) and strainer in addition to the basic equipment required for kits. You choose and buy packs of extract, hops and yeast then follow a recipe. There are lots of different recipes to follow and you can add herbs and spices to create unique blends. There is also a huge range of hops which all have there own unique flavour. This method works out about the same cost as using a Premium kit but you have the flavour control and satisfaction of creating your own recipes. We have a constantly expanding range of extract recipe packs to make things easy and get you going.

Our full range can be found here 

https://www.brewuk.co.uk/beerkits/brewextract.html

All beer kits will require basic home brewing equipment.

You will the following:

Fermentation bucket + lid (at least 25 litre)

Syphon - for moving the beer off sediment into bottles/barrel

Hydrometer - for checking the gravity/alcohol contect

Steriliser - for sterlising all equipment

Spoon/paddle - for mixing the kits

Our starter kit here contains all of the above.

You will also need a barrel or bottles for storing the beer after its finished fermenting. Why not check out our range of complete starter kits.

Extra sugar may be required dependant on the kit. In general the cheaper single can kits require 1 kg of brewing sugar and the more expensive boxed kits don't require additional brewing sugar. Malt extract (spraymalt) can be used instead of sugar at the same rate and will give the beer more body and a rounder mouth feel.

All kits will require a small amount of priming sugar (around 80-120g) for priming the bottles/barrel, which will give the beer a slight carbonation but any sugar can be used for this.

All kits come complete with yeast.

Once the wort (unfermented beer) has been made up as per the instructions (most kits take around 15 minutes) yeast is added and the fermentation takes place. There are many factors which will effect the time this takes, temperature, amount of sugars which need fermenting (ie strength of the beer) and type of yeast but you can expect most fermentations to be complete between 7 - 14 days.

Once fermentation is complete then the beer is ready to be stored in bottles or barrel and a small amount of sugar is added (known as priming) which will then ferment again but this time the Co2 produced cannot escape and will dissolve in the beer giving the beer a slight carbonation.

Then the beer is left to clear. Again the time this takes will depend on quite a few factors - type of yeast, temperature (cooler the better) and type of container to name a few but you can expect the beer to be clear and ready to drink with a few weeks (4 - 6) and the beer will continue to mature and improve for a few months after this.

Okay, there are 3 things which are the likely cause.

1. Adding too much water. If you have added the correct amount of water then this will not be the problem.

2. Not stiring after adding all the water. This will leave all the sugars at the bottom of the fermenter which will cause the gravity to be low at the top.

3. Measuring the gravity when the pre fermented wort is too cool. Hydrometers are calibrated at a set temp, usually 20c so if you measure the gravity and the wort is cooler or hotter than this then this will effect the result as liquids become less dense at warmer temperatures.

Its more than likely that one of these is the cause. If you still have issues after checking the above then please give contact us.

18 -22 c is the ideal temperature range. Most households will be at around this but if you location is cooler then you may need a heater.

Hi there, Old Speckled Hen is a extract recipe pack so you will need a large pan (10 litres min) and a strainer. You will also need basic brewing equipment such as fermenter, syphon, hydrometer and steriliser.

All you need to determine alcohol content is the original or starting gravity and the final gravity. Just drop the decimal points, subtract the smaller one from the bigger, and divide by 7.5. For example, If your starting gravity is 1.055, and your final gravity is 1.010, you would have 1.055 - 1.010 = 45 divided by 7.5 = 6% alcohol.

Dry hopping is the process of adding hops, usually in secondary, to a beer to add more of a hop aroma to your beer. Traditionally the technique is used for beer styles like pale ales and I.P.A.’s, but people are doing this process in many other styles as well. You aren’t extracting any of the oils from the hops because you would need to add heat to do that, but you are adding aroma. Being that almost 75% of human taste comes from smell, then you can see why people take this extra step with their beers.

Dry hopping methods vary, so find which way gives you the best results:

• We prefer to add the dry hops with 3-5 days left before you plan on bottling, or kegging, the beer. The reason for this is because the idea is to have the hop aroma infuse with the beer without having the aroma fade. By adding the hops only a few days before bottling, you get the freshest hop aroma throughout your beer without much loss of taste.

What type of hops are the best for dry hopping?

Most of us prefer the use of leaf hops, as they are easier to deal with when you transfer, but pellet hops will work as well. As far as the type of hops itself, that is up to you. Most brewers will use the same type of hops that they used in making the beer and many modern ales use American citrus style hops like Amarillo and Cascade for interesting aroma additions.

Be careful of the quantity of hops that you use because you can easily overpower a beer by using too much. Also avoid leaving the hops in the beer for too long as grassy flavours can develop. Usually, around 25g - 50g is all you need. Start with 25g, and then see if you need to add more the next time.

Once in the bottles or barrel beer should keep for many months and in fact many beers will benefit from some extended maturing.

In theory yes as it will be harder for the yeast to ferment but this will depend on the particular strain of yeast.

We would always recommend using brewing sugar or malt extract for adding in bulk (ie more than 500g) in any beer kit or recipe.

It really depends on the region you live in as tap water quality will vary locally. If it taste/smells nice then its probably fine to use. Adding 1/2 a crushed campden tablet / 25 litres of water will remove any chlorine from the water which can help improve taste.

Alternatively most supermarkets offer own brand bottled water in 5 litre containers at a very reasonable price.

When the beer starts to ferment a thick foam will normally form on the top. This is quite normal and will protect the beer during fermentation. This should form within 24 hrs of the yeast being added. If nothing has happened within this time you may need to check the temperature of the room as it may be too cold. If the temperture is okay, leave for a bit more time. If nothing has happened after 48 hours then you may need to add yeast nutrient but have patience before taking this step.

The foam should die down after a couple of days, after which you should take a hydrometer reading. Bottle or barrel when the hydrometer readings have remained stable for a couple of days. 

It really depends on how clear the beer is before you bottle it. The clearer you can get it the less sediment will be collected in the bottles as more will be left in the fermenter.

Making beer is a 2 stage process. First the wort (unfermented beer) needs to be prepared then yeast is added which ferments and turns the wort into beer.

Wort can be made in 3 ways. From concentrated hopped beer kits, from unhopped malt extract using fresh hops or from malted barley grains. More info on these methods can be found here.

Once the wort has been produced, yeast is added and the fermentation takes place. There are many factors which will effect the time this takes, temperature, amount of sugars which need fermenting (ie strength of the beer) and type of yeast but you can expect most fermentations to be complete between 7 - 14 days.

Once fermentation is complete then the beer is ready to be stored in bottles or barrel and a small amount of sugar is added (known as priming) which will then ferment again but this time the Co2 produced cannot escape and will dissolve in the beer giving the beer a slight carbonation.

Then the beer is left to clear. Again the time this takes will depends on quite a few factors - type of yeast, temperature (cooler the better) and type of container to name a few but you can expect the beer to be clear and ready to drink with a few weeks (4 - 6) and the beer will continue to mature and improve for a few months after this.

All kits come with simple, comprehensive instructions. As long as these are followed and the brewer is careful with sterilisation its easy and simple to make great beer at home.

Once in the bottles or barrel beer should keep for many months and in fact many beers will benefit from some extended maturing.

Flat beer will either be caused by too little priming sugar being added to the bottle/barrel or the sugar has not been able to ferment due to temperature.

If the beer is in a barrel then it could be that you have a leak from the cap. Trying adding some co2 and see if this works, if there is still no pressure then check for leaks around the cap.